Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Kips Bay
If you live in one of the towers off Second Avenue or a walk-up nearer the East River, the duct problem you’re describing is probably bigger than your apartment. Kips Bay’s apartment buildings stack exhaust risers and supply runs through dozens of units at once, so a torn flex connector or a loose register boot in your unit often traces back to a shared shaft the whole line depends on. We know how these buildings work, how a co-op or condo board signs off on the fix, and how to get from “there’s dust streaking from my ceiling vent” to a sealed, tested system. Call (855) 337-2008 and we’ll tell you what your situation needs.

Why Kips Bay Homeowners Call Air Duct Cleaning Greenwich Village for Duct Repair & Sealing
We work in the 10016 corridor often enough that the buildings, the managing agents, and the parking realities are familiar ground. Our technicians have up to 9 years of experience, and they carry Rotobrush and Nikro equipment built for commercial-grade duct work, not shop-vacs adapted for it. That matters in a Kips Bay high-rise, where the duct runs are stacked risers and the accessible sections are tucked behind fan-coils and above corridor ceilings.
Kips Bay residents call us because we can document what we find. Camera inspection, negative-pressure testing, before-and-after photos of the actual riser and connector sections. When a co-op board asks what the work involves, you have evidence to hand over. If you’re looking for duct repair and sealing that treats a shared riser as a system rather than a single vent, that’s the job we do.
We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. Call (855) 337-2008.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Kips Bay
We handle the full scope: sealing, flex duct repair, metal duct repair, and insulation. In dense Kips Bay buildings, the work usually starts small and turns into a coordinated effort with the building.
Duct Sealing
Most Kips Bay duct leaks happen at the joints, where a fitting meets a riser or a register boot is set into a masonry wall. We seal with mastic on accessible seams and use mechanical fastening where the joint has to hold under pressure. Sealing before you clean matters: an unsealed duct pulls dust back in through every gap. We pressure-test after the seal so you can see the difference.

Flex Duct Repair
Flex duct connectors behind fan-coil and PTAC units are the most common failure in postwar towers. They sag, tear, or pull loose with age, and the conditioned air goes into the wall cavity instead of your room. We replace the connector, reseat it at both ends, and check that the run isn’t crushed against the unit housing. In a building where every unit on the line has the same aging connector, one repair tells you plenty about the rest of the stack.

Metal Duct Repair
Older co-op buildings often have galvanized sheet-metal risers with seams that have opened. We repair the accessible run, re-tape and mastic-seal the seams, and check for corrosion where bathroom or kitchen exhaust has been moving humid air for decades. Any section the board has to authorize at the riser level gets documented for you to take to the managing agent.

Duct Insulation
Insulation in a Kips Bay high-rise does two jobs: it keeps supply air at temperature through a warm corridor chase, and it prevents condensation on cold duct runs during humid Manhattan summers. We replace degraded wrap on accessible sections, and we flag whether a riser-level insulation gap is worth raising with the board.
Trusted Brands We Service in Kips Bay
We work with Honeywell and Aprilaire systems, the whole-home air quality platforms most common in Kips Bay apartment buildings, and we bring Abatement Technologies negative-air and filtration units to contain dust during the work. We don’t stock parts on a truck or claim a local depot. What we do is specify and install compatible components with a fast turnaround because we know the equipment. If your building already runs a Honeywell or Aprilaire control, we’ll tell you how the duct repair complements it.

Common Duct Repair & Sealing Problems We See in Kips Bay Homes
- Torn flex duct behind fan-coils and PTACs. The connector between the unit and the riser is the first thing to fail in older towers. It leaks conditioned air into the wall cavity, which drives up your bill and leaves your apartment feeling uneven.
- Lint-clogged shared exhaust risers. When the same riser serves every apartment on the line, buildup back-feeds through loose register boots and returns in individual units. Sealing your boot helps, but the riser itself may need board approval to address.
- Board and managing-agent delays. Riser-level repairs often stall in co-op approvals, so tenants patch the unit-level symptom and the leak reappears the next heating season. We document the problem clearly so approval moves faster.
- Winter heating-season dust push. Cold, dry winters in Manhattan push dust-laden air through shared ducts across dozens of units at once, which is why the same register keeps throwing dust even after a thorough cleaning.
Pricing for Duct Repair & Sealing in Kips Bay, NY
Pricing in Kips Bay runs higher than a single-family market because the access work is real work: opening a corridor ceiling, working around a fan-coil, documenting for a board. A typical mastic sealant repair on accessible joints in a Kips Bay apartment runs $180 to $420. A flex duct repair behind one fan-coil or PTAC unit runs $220 to $480. A metal duct repair on an accessible riser section, with seam sealing and pressure testing, runs $350 to $750. Duct insulation on accessible runs runs $200 to $550. Full riser-level work authorized by a co-op or condo board is scoped separately after inspection. Every price is set per job by a written estimate, and the estimate is free. Call (855) 337-2008.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Kips Bay
We serve Kips Bay and the surrounding neighborhoods, including Murray Hill, Gramercy, Midtown, and Chelsea. The housing stock and the board-approval dynamics are similar across those corridors, so the approach holds. Call (855) 337-2008.
Serving Kips Bay, NY – Our Local Coverage Area
We serve Kips Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Kips Bay
It involves a camera inspection first, then negative-pressure testing to confirm where the leak actually is. If the leak is at the riser, that’s a building decision, and we document the accessible section and the riser-level findings so your managing agent can act. If the leak is unit-level, we seal it with mastic and test it the same visit. Call (855) 337-2008 for an exact quote; estimates are free.
Because the dust is coming from the shared riser, not your register. In Kips Bay towers, the same exhaust riser serves every apartment on the line, and lint buildup back-feeds through the loose register boot into individual units. Sealing the boot and addressing the riser is the real fix. Call (855) 337-2008 for an exact quote; estimates are free.
Yes. Shared risers and corridor-fed fan-coil systems tie units together, so a leaking joint in one apartment can send dust or moisture into the runs that serve adjacent units on the same line. That’s why a camera inspection matters more than a single-vent cleaning. Call (855) 337-2008 for an exact quote; estimates are free.
Flex duct repair means replacing a torn or disconnected connector between the fan-coil or PTAC and the riser; metal duct repair means re-sealing seams on galvanized riser sections that have opened with age. Both use mastic and mechanical fastening, but the failure modes are different. Call (855) 337-2008 for an exact quote; estimates are free.
Frequently, yes, especially in the postwar and 1980s buildings concentrated in 10016. When a dryer vent shares a stack, lint builds up along the whole run and the fire risk rises for every unit on that line. Cleaning and inspecting the accessible run is part of our service. Call (855) 337-2008 for an exact quote; estimates are free.
What Happens When You Call
You’ll describe what you’re seeing (dust from a register, a loose flex connector, a musty smell near a fan-coil), and we’ll book a time to inspect and test. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening.
Contact Us for a Free Estimate
Call (855) 337-2008 for a free estimate on duct repair and sealing in Kips Bay. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system agreed before work starts, before-and-after photos of your own ducts, and a satisfaction guarantee.
Written by the team at Air Duct Cleaning Greenwich Village.