Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Quality & Sanitizing for Greenwich Village Homeowners
If your apartment smells faintly musty when the heat first comes on, or your allergies flare every time the HVAC cycles, the problem usually isn’t the air outside. It’s what’s living inside the ducts and the air handler. Greenwich Village has a lot of pre-war buildings with long duct runs, original plaster, and HVAC systems that have been retrofitted more than once. That combination traps dust, moisture, and microbial growth where you can’t see it. Our technicians have up to 9 years of experience and carry professional-grade equipment, not improvised tools. We treat mold, bacteria, odors, and allergens at the source, then verify the result. Same-day appointments are often possible, and the phone line is answered 24/7. Call (855) 337-2008.

What Our Air Quality & Sanitizing Service Includes
Most duct cleaners stop at debris removal. We go further: cleaning, repair and sealing, then sanitizing, so you don’t have to source a second contractor when problems turn up mid-job. Here’s what each part of the service covers.
Mold Treatment
Mold grows inside ductwork and on evaporator coils when moisture sits long enough, and it releases spores into every room the system serves. You need treatment when you notice a musty smell that returns after cleaning, visible dark spotting near vents or on the coil, or allergy symptoms that worsen when the system runs. We clean the affected surfaces, apply a treatment to the growth, and correct the moisture source so it doesn’t come back. If we find gaps or deteriorated duct connections feeding the problem, we handle the repair and sealing in the same visit.

Bacteria Sanitizing
Bacteria settles in the same damp, dark places mold does, and sanitizing is the step that knocks down what cleaning alone leaves behind. It matters most after a water event, a long vacancy, or when occupants keep getting sick in one part of the home. We fog the duct interior and air handler with a sanitizing agent matched to the system, using Abatement Technologies negative-air units to keep the work contained. That containment keeps debris and treatment mist out of your living space while we work.

Odor Removal
Persistent odors, whether cooking, pet, smoke, or something you can’t identify, usually trace back to the ducts and the coil rather than the room itself. You need odor removal when air fresheners only mask the smell for a day or two, or when the odor is strongest at the supply vents. We locate the source, clean the contaminated surfaces, and treat the system so the smell doesn’t return with the next heating cycle. Masking an odor without removing the source just delays the problem.

UV Light Installation
A UV light installed at the coil or in the air handler keeps microbial growth from re-establishing on wet surfaces between cleanings. It’s worth considering when you’ve had repeated mold or odor issues, or when the coil stays damp through the cooling season. We install units sized to the system and place them where they actually do their job, not just where they’re easiest to mount. This pairs naturally with the sanitizing step, since a clean system stays cleaner longer with continuous treatment.
Air Purifier Install
A whole-home air purifier ties into the existing ductwork and filters every cubic foot of air the system moves, which is more effective than a portable unit in one room. It makes sense for households with allergies, asthma, or anyone sensitive to fine particulate. We install and service Honeywell and Aprilaire systems, the two platforms most commonly found in homes here, and we’ll size the filtration to your equipment rather than guessing. If you already own one of these systems, we can service and complement it as part of the same visit.
Allergen Reduction
Allergen reduction combines deep cleaning with filtration and moisture control to cut the dust, dander, and pollen that circulate through the ducts. It’s the right service when symptoms track with the HVAC running, when you find dust settling quickly after cleaning, or when a household member has a diagnosed allergy. We start with the Rotobrush rotary-brush system to agitate and extract debris from the duct walls, then address filtration and any gaps that let contaminants in. The result is a measurable drop in what’s circulating, not a temporary tidy-up.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Air Quality & Sanitizing
We work with Rotobrush and Nikro equipment on every job. Rotobrush’s rotary-brush system is the industry benchmark for agitation-and-extraction cleaning, and it’s what lets us reach duct walls a vacuum alone can’t touch. Nikro equipment is the same manufacturer specified in NADCA-compliant commercial projects, so the standard we clean to matches what remediation contractors expect. When we treat mold or odors, Abatement Technologies negative-air and filtration units provide containment during cleaning, preventing cross-contamination to living spaces.
On the air quality side, we install and service Honeywell and Aprilaire equipment, and we know where each platform wears out and what pairs well with it. If you already have a Honeywell air cleaner at the return or an Aprilaire filter cabinet, we work with it instead of around it. Whether you have Honeywell, Aprilaire, or any other make, we can help, and if the system needs repair or sealing before sanitizing, we handle that on the spot.
Signs You Need Air Quality & Sanitizing Right Now
- A musty smell that comes back after cleaning. If the odor fades for a week and then returns, the source is still in the system. That points to microbial growth on the coil or duct lining, which needs treatment rather than another surface pass.
- Allergy symptoms that track with the HVAC cycle. When sneezing, congestion, or itchy eyes get worse when the system runs and ease when it’s off, you’re reacting to what’s circulating. Allergen reduction and filtration address the cause.
- Visible dark spotting near vents or on the coil. Any discoloration inside ductwork or on the air handler deserves a look, because spores spread through every room the system serves. We assess it, treat it, and fix the moisture feeding it.
- Dust that settles within a day of cleaning. Rapid dust return usually means gaps or leaks pulling air from unconditioned spaces. Sealing those gaps is part of the job, and we do it while we’re on site.
- A water event or long vacancy in the home. After a leak, flood, or a stretch of vacancy in a Greenwich Village apartment, the ducts can hold moisture and bacteria long after surfaces dry. Sanitizing is the step that resets the system.
Our Air Quality & Sanitizing Process – Step by Step
- 1
Assessment and source identification. We inspect the air handler, supply and return runs, and coil, and we ask when symptoms or odors started. That tells us whether the problem is microbial, particulate, or a leak, and it shapes the treatment plan.
- 2
Containment setup. Before cleaning begins, we set up Abatement Technologies negative-air units to hold debris and treatment mist inside the work zone. This is the same protocol used in mold and hazardous-material remediation, and it’s why living spaces stay clean throughout.
- 3
Cleaning and extraction. We run the Rotobrush rotary-brush system through the ductwork to agitate debris from the walls, then extract it with Nikro equipment. Surface vacuuming alone leaves the biofilm and settled dust that cause repeat problems.
- 4
Repair and sealing. If we find gaps, disconnected joints, or deteriorated lining, we repair and seal them now rather than handing off to a second contractor. Sealed ductwork keeps treated air clean and lets your system work less hard.
- 5
Sanitizing and verification. We apply the treatment matched to the findings (mold, bacteria, or odor source), then confirm with a follow-up inspection and before-and-after photos of your own ducts. You see exactly what changed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Quality & Sanitizing Cost in Greenwich Village?
A typical air quality and sanitizing visit in Greenwich Village runs $350 – $1,200 depending on system size, the number of runs, and whether repair or sealing is needed. Mold treatment on a coil and duct run generally falls in the $400 – $900 range; bacteria sanitizing across a full system runs $350 – $700; odor removal runs $300 – $650; UV light installation runs $300 – $600 installed; and a whole-home air purifier install (Honeywell or Aprilaire) runs $600 – $1,500 depending on the unit and wiring. Allergen reduction as part of a cleaning visit adds $200 – $500. These are estimated ranges, and the written estimate sets the final price.

What affects the price: the number of supply and return runs, whether the coil needs separate treatment, whether gaps or leaks require sealing, and the size of the system. You avoid overpaying by asking for a written estimate that itemizes each step, by confirming the equipment being used, and by having repair and sanitizing quoted together rather than as separate callbacks. We don’t quote per-vent teaser prices. Every estimate is free, includes before-and-after photo documentation, and covers cleaning, repair and sealing, and sanitizing as one scope so there are no surprise add-ons mid-job.
Air Quality & Sanitizing Near Greenwich Village – Our Service Area
We serve Greenwich Village and the surrounding neighborhoods, including the East Village, Chelsea, Gramercy, the Lower East Side, Tribeca, and the Financial District. Response times depend on the day and the job scope, and fast dispatch runs from 7am to 7pm, Sunday through Friday. If you’re nearby and need air quality & sanitizing, we can usually get an assessment scheduled quickly. Call (855) 337-2008 and we’ll confirm timing for your building.
Serving Greenwich Village, NY – Our Local Coverage Area
We serve Greenwich Village and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Air Quality & Sanitizing in Greenwich Village
Air quality and sanitizing is the treatment of the air moving through your HVAC system, beyond simple debris removal. It covers mold treatment, bacteria sanitizing, odor removal, UV light installation, air purifier installation, and allergen reduction, aimed at what’s living and circulating in the ducts and coil. We combine cleaning with treatment and filtration so the result holds. Call (855) 337-2008 for a free estimate.
Most residential jobs take two to four hours, depending on system size and whether repair or sealing is needed. A single-room or coil-only treatment can finish in under two hours, while a full home with multiple runs and purifier installation takes longer. We give you a time window with the estimate so you can plan around it. Call (855) 337-2008 to schedule.
Typical costs run $350 – $1,200 for a full visit, with individual treatments priced separately: mold treatment around $400 – $900, sanitizing $350 – $700, odor removal $300 – $650, and UV or purifier installation from $300 upward. Final pricing depends on system size, contamination level, and whether repair is needed, and the written estimate sets the final price. Call (855) 337-2008 for an exact quote.
Yes, we install and service both Honeywell and Aprilaire equipment, and we can complement an existing system as part of the visit. If you have a different make, we still assess and treat the system. We’ll tell you what pairs with your equipment rather than pushing a replacement. Call (855) 337-2008 to discuss your setup.
Same-day service is often possible depending on scheduling. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 337-2008.
We stand behind the work with a satisfaction guarantee: if the treated system doesn’t meet the standard we set, we make it right. Before-and-after photos of your own ducts document what was done, so you can see the change for yourself. We’ll explain the details of the guarantee in writing with your estimate. Call (855) 337-2008.
Clear access to the air handler and any return vents, and remove fragile items from the immediate work area. We bring containment and drop protection, but giving us a clear path speeds things up. You don’t need to do anything else; if you have a Honeywell or Aprilaire system, let us know when booking so we bring the right parts and filters. Call (855) 337-2008 to schedule.
Schedule Your Air Quality & Sanitizing Service in Greenwich Village Today
Clean, seal, sanitize in one visit: that’s the scope we bring, with professional-grade Rotobrush, Nikro, and Abatement Technologies equipment and a written estimate before work starts. We’ll assess your system, explain what we find, and give you a flat price per system, with before-and-after photos of your own ducts. Call (855) 337-2008. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and there’s no obligation.
Written by the team at Air Duct Cleaning Greenwich Village.